Beanworks

Here is an example of a handout created in OpenOffice.org Writer, using screenshots:

The post on how to do this in MSWord is here. This particular post applies to OpenOffice.org 2.0 on Windows. Although most of the handouts on the ncrlab eSnips page were done in MSWord (a few are in WordPerfect), I actually use OpenOffice.org for handouts now instead of MSWord. It’s just more portable. It’s also easier in some ways (although there are a few minor gripes I have).

Since this is Windows, get screenshots using the Print Screen key and the Paint program, as described here. Once you have the images saved, open the OpenOffice.org Writer (select “Text Document” from the options). Click on the View menu, then go to the Toolbars submenu and click on the Drawing option to make the drawing toolbar available:

The toolbar will be visible at the bottom of the page. To insert an image into the page, click on the button on the draw toolbar to insert an image from file.

Navigate through the dialog box to the picture you want to insert (in this case, the large one from the Print Screen exercise), and open it. Notice the Grahics toolbar that automatically appears docked at the top of the page. Right click on the image and click on “Picture” to get to the picture properties dialog window:

It is not necessary to change the image wrap; the default works just fine. However, if you have problems shifting the image on the page, change the image wrap to “Optimal.” The best way to resize the image is to check the box to keep the image ratio then adjust the height or width by typing in the target size or using the arrows beside the boxes to adjust the size. With the “Keep ratio” box checked, the size will stay proportional as you increase one side (either height or width). This is also an easy way to make sure similar images are the same height or width.

Click the OK button to get back to the image. Now reposition the image by clicking inside the image and dragging it to where you want it on the page:

You could also resize the image by clicking on one of the corners and dragging diagonally, but the aspect ratio will not be automatically preserved as it is when changing the size in the picture properties dialog window, so it may end up stretched in one direction or the other.

Insert the smaller image using the same steps, arranging the two images on the page beside each other. Now add a box to the larger image. Click on the box shape button on the toolbar and select the rounded rectangle from the popup display.

Click and drag across the part of the larger image that was copied to create the smaller image. An opaque box will overlay the image:

Next, remove the fill by clicking on the “color” drop down menu in the graphics menu at the top of the page, and selecting “invisible.”

Now change the line width, and color (if desired), by clicking on the related drop down options on the graphics toolbar:

Do the same for the smaller image, creating a box around the whole image, and changing the line width and color to match the box on the larger image.

Now draw lines connecting the two boxes: Click on the line tool on the Drawing toolbar at the bottom.

Now click on a corner of one of the boxes and drag the cursor to the corner of the other box, creating a line between them. Then change the line width and color, just as you did with the boxes.

Create another line between the two opposite corners, adjusting the color and width as with the first line. The final effect should look something like this:

The boxes and lines can be moved by dragging when the cursor turns into a four-way arrow over them.  If the box is snapping to a grid rather than staying precisely where you move it, hold down the Alt key while dragging.  This will override any grid restrictions.

I have told a lot of people, and posted advice here, to use handouts with visual cues, like this one:

Someone asked how to create this type of handout with screenshot images, so here’s a rundown on how I do it in Windows. I have used OpenOffice.org, Word and WordPerfect, but this post will only cover MSWord; I’ll do OpenOffice.org and WordPerfect posts next.The first step is to get screenshots. If you don’t know how to do that, see the instruction page for Windows.Once you have the images saved, you are ready to put the images into the handout document. Open MSWord. I usually do this in Word 2000 or Word 2002, but these steps should work in Word 97. Make sure the Drawing Toolbar is visible; if it isn’t, go to the View menu, select the Toolbar option, and click on Drawing if there isn’t a check by it already. It should appear at the bottom of the window.

Type whatever text or instructions you are going to use, and move the insertion point a couple lines below the text (by pressing the “Enter” key). Click on the “Insert Image” button on the Drawing Toolbar:

Navigate through the dialog box to the image you want (in this case, the larger image saved in the Print Screen exercise), and select it to open. If the Picture Toolbar is visible (notice it “floating” above the image in the example?), click on the text-align button. (If it is not visible, right click on the image and move the cursor to the align option.) Choose the “Tight” option in the menu that drops open.

Resize and reposition the image where you want it (notice the enclosing box disappears and the black square “handle” boxes have been replaced with circles) by clicking and dragging on one of the corner dots (to resize) and clicking inside the image and dragging (to reposition).

Click on the “Insert Image” button again, and navigate to the smaller image to insert it. Change the image alignment as with the larger image, and position it where you want it. Click on a corner and drag to enlarge the image when the cursor turns into a double arrow.Click on the Auto Shapes button at the bottom and choose the rounded rectangle from the Basic Shapes options.

Now move the cursor to the part of the image you copied earlier and drag across what you had copied. An opaque box will overlay the image.

Move the cusor back to the Drawing toolbar and click on the “Fill” button. Select “No Fill” from the pupup menu.

Click on the “Line” button and select a wider width.

Click on the “Color” button and select a different color, if desired.

Repeat these steps to put a rounded rectangle around the smaller image. You can resize the rectangle at any time by clicking and dragging its corner. If the boxes or lines seem to be snapping to a preset grid (they won’t change position to exactly where you want them), hold down the Alt key (next to the spacebar) while you click and drag.Now click on the Line button and move the cursor back onto the document.

Click on one of the corners of one of the drawn rectangles and drag across to a corner of the other drawn rectangle so there is a line from one box to the other.

If the line is not the right thickness or color, change it now using the line width tool and color tool you used for the boxes. You can also change the length of the line by clicking and dragging one of the ends.

Draw another line from an opposite corner of one box to another corner of the other box.There is only one thing left to do: “glue” them all together. Click on one of the lines or boxes. Hold down the shift key and click on each of the drawn units until they are all selected. Keep holding down the shift key and click on the images as well, so that everything is selected.Click on the “Draw” button on the Draw toolbar. Click on the option that says “Group.” Now the images and boxes will stay together as one group as you continue to add to or edit the page.